Autodesk Online Training

As an Autodesk authorised training centre, we provide a wide range of training options to enable you to build the knowledge and skills to ensure that your organisation achieves the best from your Autodesk solution.

For any training enquiries call us direct on 061 919000 or email training@procad.ie

Online Based Training

The course is broken down into 5 sessions. To complete this course, you will need to attend five online sessions and each session is two hours long. The full training will be held in the same week.

Participants must have AutoCAD software installed on their laptop.

The online  course takes participants through the basics of AutoCAD/AutoCAD LT, to a point where candidates are competent using the commands and tools in AutoCAD/ AutoCAD LT.

Using hands-on exercises the trainees are shown how to create new drawings, edit existing drawings and prepare drawings for accurate plotting.
Who Should Attend?

  • New or novice users of AutoCAD.
  • Users who have previously used a different CAD tool and are looking to migrate to AutoCAD.

To book a place on this course complete booking form.

Course Cost: €500

The course is broken down into 3 sessions. To complete this course, you will need to attend 3 online sessions and each session is two hours long. The full training will be held in the same week.

Participants must have AutoCAD software installed on their laptop.

The course takes participants through the advanced features of AutoCAD to a point where candidates have developed the skills and knowledge using the more complex features of AutoCAD. The trainees are shown how to handle files, Xrefs, Advanced Plotting and Data Management.

Who Should Attend?

Candidates must of completed AutoCAD Essentials or have the relevant experience before completing AutoCAD Advanced Training.

To book a place on this course complete booking form.

Course Cost: €250

The course will provide learners with a solid grounding in Building Information Modelling (BIM) using Autodesk’s Revit Architecture. Throughout the course, candidates will be shown how to create 3D architectural models and associated documentation. As part of the creation of the 3D model, you will be able to get a realistic architectural visualisation of the end project.

  • The course is broken down into 5 sessions. To complete this course, you will need to attend five online sessions and each session is two hours long.
  • Participants must have the software installed on their laptop.

Course Cost: €600

Revit MEP Essentials online training will cover the user interface and the basic HVAC, electrical, and piping/plumbing components of Revit MEP. Sign up for this course and you will be given the Necessary Tools Required To Create, Document, And Print Parametric Models.

  • The course is broken down into 5 sessions. To complete this course, you will need to attend five online sessions and each session is two hours long.
  • Participants must have the software installed on their laptop.

Who Should Attend?
Requirement to have completed Revit Architectural Training before you can complete Revit MEP Essentials Training

Course Cost: €600

Email for Upcoming Dates:  

training@procad.ie 

The course covers the key fundamentals of setting up and implementing BIM 360 Docs. Covering the creation, management and implementation of a project as well as the key fundamentals to administering and using the platform via the web and tablet/mobile access.

  • The course is broken down into 2 sessions. To complete this course, you will need to attend two online sessions and each session is two hours long.
  • Participants must have the software installed on their laptop.

Course Cost: €325

Email for Upcoming Dates:  

training@procad.ie 

This course is an introduction to the Advance Steel platform. During the course you will create basic models of platforms, stairs and buildings using the default macros. You will be afforded the opportunity to utilize 2D functionality to create your 3D model and make adjustments using the parametric functionality of Advance Steel. You will then produce the relevant outputs from the model.

Who should attend?

Designed for: Structural Fabricators and detailers who want to get to grips with the essentials of Advance Steel.

  • The course is broken down into 5 sessions. To complete this course, you will need to attend all five online sessions and each session is two hours long.
  • Participants must have the software installed on their laptop.

Course Cost: €650

Email for Upcoming Dates:  

training@procad.ie

Classroom Based Training

The Autodesk Certification Program enables experienced users to receive special recognition for their knowledge of Autodesk software applications. Gain that powerful advantage with Autodesk Certification.  Certification is becoming increasingly important to validate skills and to ensure best practice in the use of this software. Achieving Autodesk Certification gives you:

  • Professional credibility
  • Demonstrates your skills, capabilities and commitment
  • Shows a return on training  investment for your employer
  • Your own personalised electronic certificate
  • Your own official Autodesk Certification logo for use on business stationery

Take this opportunity to become a Certified Autodesk professional – Get Ahead, Get Certified!

Upcoming Dates:  

Please call office on 061 919 000 for dates and more information

The course takes participants through the basics of AutoCAD/AutoCAD LT, to a point where candidates are competent using the commands and tools in AutoCAD/ AutoCAD LT.

Using hands-on exercises, the candidates are shown how to create new drawings, edit existing drawings and prepare drawings for accurate plotting.

Who Should Attend?

  • New or novice users of AutoCAD.
  • Users who have previously used a different CAD tool and are looking to migrate to AutoCAD.

To book a place on this course, select your preferred date from the calendar below and complete booking form

Course Cost: €565

The course takes participants through the Advanced features of AutoCAD to a point where candidates have developed the skills and knowledge using the more complex features of AutoCAD. The trainees are shown how to handle files, Xrefs, Advanced Plotting and Data Management.

Who Should Attend?

This course is designed for candidates who have CAD experience and who wish to develop skills through the advanced features of AutoCAD.

To book a place on this course, select your preferred date from the list below and complete booking form

Course Cost: €350

This course teaches the production of Electrical Schematic & Terminal Plan Drawing, BOM in various formats, Connection List reports and other affiliated reports using Autodesk AutoCAD Electrical. This course is all practical, with a hands-on approach providing you with your own professional CAD computer. You will also be provided with your own bound set of course notes, which includes a reference guide.

Who Should Attend?
New users of AutoCAD Electrical. Previous basic knowledge of computers and AutoCAD is required.
The course is aimed at Electrical Engineers who have a good understanding of the electrical design process.To book a place on this course, select your preferred date from the calendar below and complete booking form.

Upcoming Dates: Please call the office on 061 919 000 for dates

Autodesk Vault 2020 course provides instructions to features of Autodesk Vault software. The focus of this training guide is Bill of Material (BOM) management and Engineering Change Order (ECO) process. This course is intended for users with knowledge of all Autodesk Vault Basic and Autodesk Vault document management features. It focuses on the features of Autodesk Vault Professional pertaining to BOM and ECO’s. Hands-on exercises are included to reinforce usage of items, BOM’s, ECO’s, and automated workflows.

Who Should Attend?

This course is designed for new Vault users who need to become familiar with all the main tools within Autodesk Vault Software.
Before starting this course, students should have a working knowledge of Vault products or similar data management products.

Course Cost: €400 p/day

Upcoming Dates: Please call the office on 061 919 000 for dates.

Click Here for Training Overview

Advance Steel course provides instructions to features of the Advance Steel software. The focus of this training guide is to provide an understanding of 3D steel detailing by showing the necessary tools to get you up and running with the software. By undertaking these modules, we ensure you will have correct skills and understanding for you to employ Advance Steel in your structural projects.

Who Should Attend?
This course is designed for new Advance Steel users who need to become familiar with all the main tools within Advance Steel Software.
Before starting this course, students should have a working knowledge of Autodesk products or similar products.

Course Cost: €895

The course will provide learners with a solid grounding in Building Information Modelling (BIM) using Autodesk’s Revit Architecture. Throughout the course, candidates will be shown how to create 3D architectural models and associated documentation. As part of the creation of the 3D model, you will be able to get a realistic architectural visualisation of the end project.

Who Should Attend?
This Revit Architecture Essentials Training Course is tailored for completely new users who wish to gain the necessary skills to complete projects using Autodesk Revit Architecture software.

New or novice users of Revit.

No previous CAD training is required but participants should ideally have some level of experience in drafting, design or engineering.

To book a place on this course, select your preferred date from the calendar below and complete booking.

Course Cost: €550

The MEP course introduces students to the software’s user interface and the basic HVAC, electrical, and piping/plumbing components of Revit MEP. The course will equip students with the tools necessary to create, document, and print parametric models.

Who Should Attend?

New Autodesk Revit MEP users or other Autodesk software users who want to learn the essential elements of Revit MEP software.

Some experience in Revit Architecture is essential.

To book a place on this course, select your preferred date from the calendar below and complete booking form

Course Cost: €595

The course is an introduction to 3D Design for Autodesk Inventor. It is a 3-day essentials course, split into 2 initial days of training with a third date 6-8 weeks later. This allows candidates sufficient time with the software, before returning for their final day of training. The objective is to teach candidates to become proficient in the creation of parts and assemblies of moderate complexity and how to document and showcase their designs

To book a place on this course, select your preferred date from the list below and complete the booking form.

Course Cost: €995

In this course, candidates learn the recommended workflows and advanced functionalities for creating 3D assemblies using Autodesk Inventor.

Students explore the proper techniques and recommended workflows for skeletal modelling, adaptive design, derived design, and functional design. Students also learn how to quickly create steel frame designs, create and document welded designs, and publish custom parts using the Content Center.

Hands-on exercises representing real-world, industry-specific design scenarios are included.

Who Should Attend?
Current users of Inventor, who have a good working knowledge of the software.

Course Cost: €750

In this course, candidates will learn to use the different workspaces within Fusion 360.

In this 2-day course, candidates will progress from creating a basic sketch to full working assembly, which they will then learn to create renders, simulations, drawings and CAM tool paths.

Following completion of this course candidates will become proficient in the creation of parts and assemblies of moderate complexity and how to document and showcase their designs.

Who Should Attend?
Novice or users with little experience and/or those who have used different 3D CAD packages.

Course Cost: €650

Webinars

Save time and improve profitability with Duplicate Search in Vault Professional 2021.
Many Manufacturers are unwittingly introducing duplicate part numbers during the product design phase.

According to industry analysts Aberdeen Group, the annual carrying costs of introducing a new part number range between $4,500 and $23,000 per item

There is a new way to identify duplicate files in Vault. The Duplicate Search function in Vault 2021 allows you to run a 3D geometric search for parts which will save you significant time, cost and effort in identifying, recording, releasing and managing duplicate files.

Learn how Duplicate Search compares 3D geometry and seamlessly delivers insights on duplicate content for managers and CAD users

Software in use will include: Vault

Email to Register training@procad.ie

This webinar showcases new features of the latest version along with a full featured demonstration. During the demonstration we will start a new project including the creation of electrical schematics, terminal plans and panel layouts. We will look at automatic creation of drawings from spreadsheet such as PLC drawings from the PLC programming software. A variety of reports will be shown including Bills of Materials in various formats, Connection List reports, and other associated reports. For those requiring 3D Integration with Autodesk Inventor will also be demonstrated.

New to CNC Machining or Fusion 360 CAM, this webinar shows you how to get started.

  • Basics of 2.5 and 3 axis milling
  • Part setup
  • Creating tools
  • Creating toolpaths
  • Simulations
  • Creating G-Code for your Machine

Software in use will include: Fusion 360

Email to Register training@procad.ie

Autodesk Vault is an essential tool for managing your CAD data with essential features for every Drawing Office including Traceability, Lifecycle workflows and Revision control of your CAD data.

Check out our Online Data Management webinar using Vault Professional to see the very latest in:

Best-in-class CAD Integration – Manage data associated with the digital model throughout the project lifecycle.

Concurrent Design – Work collaboratively. Multiple users can work without overwriting the others’ data.

Data Re-use – Find, organise, copy and re-use data to save hours of time, so you can spend more of your workday innovating.

Revision Management – Release and track files securely throughout the design cycle to reduce errors.

This webinar will give an Overview of Autodesk Vault 2021 with a focus on new features and enhancements including:

  • Duplicates Dashboard: allowing Smart Duplicate Reduction in your Vault database
  • Advanced cloud collaboration: allowing users outside of your office to avail of Autodesk’s Cloud platforms such as BIM 360 or Fusion 360 integrated with your office-based Vault database and file store
  • Support for Inventor and Revit interoperability
  • Improved Efficiency for Administrators

Software in use will include: Vault Professional

Email to Register training@procad.ie

Introduction to Revit Architecture

Join our webinar for an introduction on how you can use Revit building design software for every phase of your project, from design and documentation, to analysis then to visualisation stage and multidiscipline coordination.

Software in use: Revit Architecture 

Email to Register training@procad.ie

Software in use will include: Fusion 360

Register for this webinar where our BIM expert Sean will take you through all the capabilities of BIM360 Design. Design can connect your team through the cloud, this can help improve productivity and efficiency. Your team will have access to the files they need to work as they are in the cloud.

Email to Register training@procad.ie

Moving from 2D to 3D & BIM is new experience for most Architects, in this webinar we want to educate Architects as to the origins and theory behind BIM. We will cover the current standards & common practices applicable to BIM projects and where the industry is as a whole in Ireland. BIM as a deliverable is far more common these days and does vary depending on the project size and type. Attend this webinar if you want to move to BIM but don’t quite no why or the how. Jonathan is an Architectural Technologist (BSc.) & experienced BIM Manager (MSc. BIM) in Ireland.

Software in use will include: BIM

Email to Register training@procad.ie

Need More Information?

Contact Procad Today